1065
1066
2-burner, Round-bottome Knifemaker:
Case Size- 17" W x 8"H x 9"D
Weigth- Approx 110 pounds
Front Opening- 2" x 13", with end blocks installed
End Openings- 3" x 5", at tallest point (front block, not pictured, sold separately)
Variations- Can be used witha ll 3 sides open
Top can be raised to accomodate larger stock by using longer bolts and taller fire bricks
Bottom- Made of refraactory that will withstand welding flux

Includes- LP orifices*, 8' of hose, regulator, 115v blower*

*Can be ordered for use with natural gas or a 12v DC blower system




1069 1070
2-Burner Open-End + 4:
Case Size- 17”W x 8”H x 9”D
Front Opening- 2” x 13”, with end blocks installed
End Openings- 2” x 5”, with front block installed
Variations- Can be used with all 3 sides open
Top can be raised to accommodate larger stock by using longer bolts and taller firebricks
Weigth- Approx 90 pounds

Includes- Hose, regulator, 115v blower *Can be ordered for use with natural gas or 12v blower system





1073 1074
3-Burner Open-End:
Case Size- 20”W x 8”H x 12”D
Front Opening- 2” x 16”, with end blocks installed
End Openings- 2” x 8”, with front block installed
Variations- Can be used with all 3 sides open
Top can be raised to accommodate larger stock by using longer bolts and taller firebricks
Weigth- Approx 130 pounds

Includes- Hose, regulator, 115v blower

*Can be ordered for use with natural gas or 12v blower system





1077 1078
3-Burner, Round-bottom Knifemaker:
Case Size- 20”W x 8”H x 12”D
Front Opening- 2” x 16”, with end bocks installed
End Openings- 3” x 8”, at tallest point with front block installed
Variations- Can be used with all 3 sides open
Top can be raised to accommodate larger stock by using longer bolts and taller firebrick
Bottom- Made of refractory that will withstand welding flux
Weigth- Approx 165 pounds

Includes- Hose, regulator, 115v blower

*Can be ordered for use with natural gas or 12v blower system





1081
Forge with longer bolts and taller firebricks installed



Knife Vice

knife vice
360-degree capable
Clamps/bolts to top or bottom of work surface
Base plate can mount in either direction
Accepts blades up to 2 1/8” wide
Up to 6” of stock can be inside the vise to work
Steel construction, high performance paint
Blade can be placed in vise to work on handle
Overall dimensions: 9”L x 4”W x 5”H


This knifemaker’s vise allows you to work on your blades without having to continually adjust the blade within the vise. Constructed in our shop & painted with the same paint we use on our gas forges.